LK Armatur Our websites English
Close

Our websites

LK 538 ThermoFill® EA

LK 538 ThermoFill® EA

  • Integrated shut-off with ball valve and non-return valve
  • The non-return valve can be inspected, which means it is classified as EA type backflow protection according to EN 1717

LK 538 ThermoFill® EA is a filling valve for heating systems. The valve has an integrated shut-off/check valve which ­ensures opening even at low pressure differences. The check valve is inspectionable and clas...

LK 538 ThermoFill® EA

Variants

LK 538 - Male thread

LK 538 - Male thread 1 artikel

Article Dim. Kvs m³/h Weight (kg) Item List
090268 M ½" 2,7 0.1

090268

Dim. M ½"
Kvs m³/h 2,7
Weight (kg) 0.1
Item list
LK 538 - Male thread / Compression fitting

LK 538 - Male thread / Compression fitting 1 artikel

Article Dim. Kvs m³/h Weight (kg) Item List
090269 M ½" / 15 mm 2,7 0.2

090269

Dim. M ½" / 15 mm
Kvs m³/h 2,7
Weight (kg) 0.2
Item list
LK 538 - Compression fitting

LK 538 - Compression fitting 1 artikel

Article Dim. Kvs m³/h Weight (kg) Item List
090271 15 mm 2,7 0.2

090271

Dim. 15 mm
Kvs m³/h 2,7
Weight (kg) 0.2
Item list

Detailed Information

Description

LK 538 ThermoFill® EA is a filling valve for heating systems. The valve has an integrated shut-off/check valve which ­ensures opening even at low pressure differences. The check valve is inspectionable and classified as a back flow preventer Type EA according to EN 1717. The arrow on the valve body indicates the direction of the flow.

Male threads are sealed in the usual manner. Both the inlet side as well as the outlet side are designed according to the LK Armatur O-ring seal system. When connecting to this system, tighten first by hand until stop, then another 0.5-1.5 turns with an appropriate tool into the right position.

It is easier to fit the compression fitting if a lubricant is applied to the thread and bevel. Tighten first by hand and then with a box spanner. Number of turns to be tightened with a spanner: See the separate datasheet for compression fittings. Soft pipes are to be fitted with a support sleeve.

The valve requires no maintenance but the installation should be checked regularly.

Technical Data

Working temperature: Min. 5 °C/Max. 90 °C
Max. working pressure: 1.0 MPa (10 bar)
Opening pressure, check valve: 1 kPa (0,01 bar)
Thread standard: G - male thread
Material, valve body: DZR Brass EN 12165 CW625N
Other data: Check valve: Type EA according to EN 1717
Material, check valve: POM
Material, sealing: EPDM

Technical Diagrams

Capacity Diagram