LK Armatur Our websites English
Close

Our websites

50A Strainer

50A Strainer

Dirt filter 50A is used in heating and cooling systems.

50A Strainer

Variants

50A - Female thread

50A - Female thread 8 variants

Article Dim. A mm B mm Note Kvs m³/h Weight (kg) Dimensional sketch Item List
506 40 80 M ¼" 50 36 Max. working pressure: 1,6 MPa
506 40 82 M ½" 53 36 Max. working pressure: 1,6 MPa (*=Viton) 4,8 0. 1
506 40 83 M ¾" 65 43 Max. working pressure: 1,6 MPa (*=Viton) 5,9 0. 2
506 40 84 M 1" 77 54 Max. working pressure: 1,6 MPa (*=Viton) 7,8 0. 3
506 40 85 M 1 ¼" 91 65 Max. working pressure: 1,4 MPa 15,3 0. 5
506 40 86 M 1 ½" 102 75 Max. working pressure: 1,4 MPa 23 0. 7
506 40 87 M 2" 118 89 Max. working pressure: 1,4 MPa 37 1. 2
506 40 89 M 3" 174 126 Max. working pressure: 1,4 MPa (**=Red Brass) 86 2. 5

506 40 80

Dim. M ¼"
A mm 50
B mm 36
Note Max. working pressure: 1,6 MPa
Kvs m³/h
Weight (kg)
Dimensional sketch
Item list

506 40 82

Dim. M ½"
A mm 53
B mm 36
Note Max. working pressure: 1,6 MPa (*=Viton)
Kvs m³/h 4,8
Weight (kg) 0. 1
Dimensional sketch
Item list

506 40 83

Dim. M ¾"
A mm 65
B mm 43
Note Max. working pressure: 1,6 MPa (*=Viton)
Kvs m³/h 5,9
Weight (kg) 0. 2
Dimensional sketch
Item list

506 40 84

Dim. M 1"
A mm 77
B mm 54
Note Max. working pressure: 1,6 MPa (*=Viton)
Kvs m³/h 7,8
Weight (kg) 0. 3
Dimensional sketch
Item list

506 40 85

Dim. M 1 ¼"
A mm 91
B mm 65
Note Max. working pressure: 1,4 MPa
Kvs m³/h 15,3
Weight (kg) 0. 5
Dimensional sketch
Item list

506 40 86

Dim. M 1 ½"
A mm 102
B mm 75
Note Max. working pressure: 1,4 MPa
Kvs m³/h 23
Weight (kg) 0. 7
Dimensional sketch
Item list

506 40 87

Dim. M 2"
A mm 118
B mm 89
Note Max. working pressure: 1,4 MPa
Kvs m³/h 37
Weight (kg) 1. 2
Dimensional sketch
Item list

506 40 89

Dim. M 3"
A mm 174
B mm 126
Note Max. working pressure: 1,4 MPa (**=Red Brass)
Kvs m³/h 86
Weight (kg) 2. 5
Dimensional sketch
Item list

Detailed Information

Description

Dirt filter 50A is used in heating and cooling systems.

The arrow on the filter housing indicates the direction of flow. The best function is achieved when the dirt filter is installed horizontally with the filter drum facing down. The dirt filter must be fitted in a zone that can be closed. This is because it must be possible to easily collect water flowing out when cleaning the filter, while also avoiding unnecessary topping-up of the water in the system.

The filter should be cleaned according to a set procedure. On installation, the filter is ideally cleaned after just a month or so of operating time. The time interval can then be extended depending on the degree of contamination in the filter. If necessary, use standard washing-up liquid or a soap solution to clean the filter drum.

Technical Data

Working temperature: Max. 120 °C for size DN 15 and DN 20, for the rest max. 110 °C
Thread standard: G - female thread
Other data: Material, Strainer Brass MS58 (**=Red Brass)
Material, filter drum Stainless steel SS 2331-02
Material, seal NBR (*=Viton)
Other data: Specification filter cartridge:
Number of holes/cm² 70 st
Hole area 0,25 mm²
Mesh opening, filter Ø max. 5 mm