LK Armatur Our websites English

Our websites

53CR Strainer

53CR Strainer

Dirt filter 53CR is used in heating and cooling systems.

53CR Strainer


53CR – Male thread

53CR – Male thread 1 artikel

Article Dim. Kvs m³/h A mm B mm Weight (kg) Dimensional sketch Item List
055074 M ¾" 5,1 82 42 0.2


Dim. M ¾"
Kvs m³/h 5,1
A mm 82
B mm 42
Weight (kg) 0.2
Dimensional sketch
Item list

Detailed Information


Dirt filter 53CR is used in heating and cooling systems.

The arrow on the filter housing indicates the direction of flow. The best function is achieved when the dirt filter is installed horizontally with the filter drum facing down. The dirt filter must be fitted in a zone that can be closed. This is because it must be possible to easily collect water flowing out when cleaning the filter, while also avoiding unnecessary topping-up of the water in the system.
The thread is sealed in the usual way.

The filter should be cleaned according to a set procedure. On installation, the filter is ideally cleaned after just a month or so of operating time. The time interval can then be extended depending on the degree of contamination in the filter. If necessary, use standard washing-up liquid or a soap solution to clean the filter drum.

Technical Data

Working temperature: Max. 135 °C
Max. working pressure: 1.6 MPa
Thread standard: G - male thread
Other data: Material, Strainer DZR Brass
Material, filter cartridge stainless steel SS 2331-02
Other data: Specifikation filtertrumma:
Number of holes/cm² 70 st
Hole area 0,25 mm²
Mesh opening, filter Ø max. 0,5 mm
Material, cover sealing: Viton