LK Armatur Our websites English
Close

Our websites

SFP Flowswitch 22

SFP Flowswitch 22

Flow indicator for e.g. start of pump. Suitable for tapwater systems.

SFP Flowswitch 22

Variants

SFP 22

SFP 22 1 artikel

Article no. Dim. Kvs m³/h Weight (kg) Item List
090330 22 mm 1,2 0.7

090330

Dim. 22 mm
Kvs m³/h 1,2
Weight (kg) 0.7
Item list

Detailed Information

Description

Flow indicator for e.g. start of pump. Suitable for tapwater systems.

The flow indicator can be installed in any position, but not so that the contact system is located beneath the flow indicator. A cast arrow on the underside indicates the direction of flow. Installation of the compression fitting is facilitated if lubricant is applied to the thread and chamfer. Tighten manually first, then use a fixed wrench. Tightening, number of turns with wrench plus other technical data, please see separate data sheet for Compression fittings, Technical data. Soft pipes are fitted with support sleeves.

The Flowswitch requires no maintenance.

Technical Data

Voltage: 230 V
Working temperature: Min. 5 °C / Max. 95 °C
Ambient temperature: Max. 80 °C
Max. working pressure: 1 MPa
Max. flow: Flow for start and stop: 0,017 l/s and 0,013 l/s, + - 0,004 l/s
Signal connector: 2-point SPDT, 10(3) A
Protection type: IP 40
Other data: Material, housing Dezincification-resistant brass
Cable specification: 3-core L= approx. 800 mm

Documentation